Our company is a glass bottle manufacturer with many years of experience. The products mainly include various glass beverage bottles, wine bottles, milk white wine bottles, and roasted vases, and we can design and produce bottles according to customer needs. Among them, how to avoid friction and collision between glass bottles during the production process? We need to explain in detail how to solve this problem:
1. Reduce the production speed of glass wine bottle manufacturers, so that the cooling time of glass wine bottle manufacturers can be appropriately increased
2. Lower the temperature of the glass solution in the feeder basin: Use a cooling fan to cool the glass solution in the feeder
3. Spray cold spray paint for glass wine bottle manufacturers: When the product is in the assembly line, spray anti-friction paint to enhance the hardness of the product and avoid friction marks.
First of all, let’s understand the “double suture”, which is a technical defect of glass bottle manufacturers in the production process. It is a common and difficult to overcome technical problem, which affects the appearance of the product.
After years of research, there are now two solutions. The first solution is to use a wide rectangular strip and a dovetail groove to cooperate, which is reliable in operation and has a short effective stroke, which is not conducive to adjustment. The second solution is to use the form of a key and a groove to cooperate. , its stability is high, but the processing efficiency is low, and it is inconvenient to replace the mold. In the investigation of many glass bottle factories, it was found that there are many reasons for the defect of “double suture”, such as: the front and rear or left and right sides of the holding clamp are not level; the gap error between the holding clamp and the two sides of the mold is different; the cavity of the mold is The degree of lubrication varies; even due to differences in thermal expansion, double sutures can be created. In the final analysis, due to the unequal frictional force generated on both sides of the clamping tongs when the mold is opened, the rotation of the clamping tongs is dislocated when the molding is opened, so that the initial mold stitching line and the molding stitching line do not coincide, which is unavoidable. The factors caused a huge number of waste bottles, which caused huge economic losses to enterprises. In the process of the development of Yuncheng glass bottle manufacturers, we must continue to study and learn to minimize this loss and improve our profit margins! Hope our industry develops better and better!
Uneven thickness of glass wine bottle This refers to the uneven distribution of glass on the glass bottle. The main reason is that the temperature of the glass gob is not uniform, the part with high temperature has low viscosity and is easy to blow thin; the part with low temperature has large resistance and is thicker. The temperature of the glass wine bottle manufacturer’s model is uneven, the glass on the high temperature side cools slowly and is easy to blow thin, and the glass on the low temperature side, so the glass cools quickly and blows thick. The bubbles generated during the forming process are often several large bubbles or several small bubbles concentrated together, which are different from the evenly distributed small bubbles in the glass itself. If the temperature of the gob is too low or the model is too cold, the mouth and shoulders will not be blown fully, resulting in defects such as gaps, flat shoulders and unclear patterns.
These are the main ways to effectively avoid friction and collision between glass bottles. You must operate correctly according to the instructions. Only in this way can you achieve better results. More information about glass bottles will continue to be sorted out for you. Respect Please pay attention.